Skip to Main Content
Article navigation
Volume 3, Issue 4
1 April 1983
This article was originally published in
Assembly Automation
Assembly Automation Cover Image for Volume 3, Issue 4
Review Article| April 01 1983

Why it pays to assemble with molten metal Available to Purchase

Eric P. Graham
Eric P. Graham
Vice‐President and General Manager, Equipment Division, Fisher Gauge Ltd, Peterborough, Ontario, Canada
Search for other works by this author on:
This Site
PubMed
Google Scholar
Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-4078
Print ISSN: 0144-5154
© MCB UP Limited
1983
Assembly Automation (1983) 3 (4): 198–201.
https://doi.org/10.1108/eb004606

The benefits of assembly of components by injection of molten metal are described in detail in this article.

This content is only available via PDF.
© MCB UP Limited
1983
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
123 Views
View Metrics
A robot operational state recognition method based on SGMD-LSTM-Transformer hybrid network
Corrigendum: Broad learning system-based fixed-time control for a robot with input saturation and output constraint
Novel bucket sort-based layered model predictive control without weight adjustment of modular multilevel converter
Hierarchical secure trajectory planning for cooperative mandatory lane changes

Suggested Reading

Decomposition of a concrete floor and ignition of gaseous products due to spillage of molten aluminium
Magazine of Concrete Research (December,1987)
Building three‐dimensional objects by deposition of molten metal droplets
Rapid Prototyping Journal (January,2008)
CORROSION OF SILVER in Molten Salts
Corrosion Technology (September,1963)
Ultra-low corrosiveness molten LiCl-KCl-Li salt solution with dissolved metallic Li component
Anti-Corrosion Methods and Materials (April,2026)
Magneto-thermal-convection stability in an inclined cylindrical annulus filled with a molten metal
International Journal of Numerical Methods for Heat & Fluid Flow (August,2020)

Related Chapters

Application of molten slag from municipal waste as liquefied stabilized soil
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006
The Continuous Production of Open-Hearth Steel from Molten Blast-Furnace Metal.”1
ENGINEERING CONFERENCE, 1903.
46. SCARABEE—an interpretation of the pump trip and inlet blockage series
Science and technology of fast reactor safety

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal