Skip to Main Content
Article navigation
Volume 6, Issue 2
1 February 1986
This article was originally published in
Assembly Automation
Assembly Automation Cover Image for Volume 6, Issue 2
Review Article| February 01 1986

Robotic assembly of diesel injection components Available to Purchase

Author & Article Information
Publisher: Emerald Publishing
Online ISSN: 1758-4078
Print ISSN: 0144-5154
© MCB UP Limited
1986
Assembly Automation (1986) 6 (2): 91–94.
https://doi.org/10.1108/eb004695

Diesel Kiki has installed a line of seven of its own robots to tackle the precision involved in components for diesel injection pumps. John Hartley reports.

This content is only available via PDF.
© MCB UP Limited
1986
You do not currently have access to this content.
Don't already have an account? Register

Purchased this content as a guest? Enter your email address to restore access.

Please enter valid email address.
Email address must be 94 characters or fewer.
Pay-Per-View Access
$39.00
Rental
This article is also available for rental through DeepDyve. Read this now at DeepDyve
129 Views
View Metrics
A robot operational state recognition method based on SGMD-LSTM-Transformer hybrid network
Corrigendum: Broad learning system-based fixed-time control for a robot with input saturation and output constraint
Novel bucket sort-based layered model predictive control without weight adjustment of modular multilevel converter
Hierarchical secure trajectory planning for cooperative mandatory lane changes

Suggested Reading

The shape of creaminess: consumers expected and perceived rounded chocolates as creamier than squared
British Food Journal (October,2021)
New robots all round in Japan
Industrial Robot (April,1983)
The effects of methanol–diesel direct dual fuel injection at varying injection pressures in a compression ignition engine
Industrial Lubrication and Tribology (December,2025)
A new model of fuel spray shape at early stage of injection in a marine diesel engine
International Journal of Numerical Methods for Heat & Fluid Flow (November,2021)
Study of low load performance on a two-stroke direct injection spark ignition aero-piston engine fuelled with diesel
Aircraft Engineering and Aerospace Technology: An International Journal (September,2020)

Related Chapters

Clean Air Gas Engine (CAGE): reducing emissions by replacing diesel power in construction
High Speed Two (HS2): Infrastructure Design and Construction (Volume 4)
The Use of Carbide Lime and Portland Cement on the Encapsulation of a Soil Contaminated by Diesel Oil
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006
Influence of injection rate on injectability properties of a cement grout in a sand
5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics: Proceedings of the ISSMGE’s fifth international congress organized by the Geoenvironmental Research Centre, Cardiff University and held at Cardiff City Hall on 26–30th June 2006

Recommended for you

These recommendations are informed by your reading behaviors and indicated interests.

Cited By

Google Scholar
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal