Page 1 | Search Results | Rapid Prototyping Journal

1-6 of 6

Sort by

Sort Order Select

Journal Articles

3D printing of lattice-structured hard carbon negative electrodes for sodium-ion batteries using vat photopolymerization

Sina Bakhtar Chavari, Ana C. Martinez, Pedro Cortes, Eric MacDonald, Bharat Yelamanchi, Myeong-Lok Seol, Donald A. Dornbusch, William H. Huddleston, Cadre J. Francis, Carol B. Ochoa Putman, Alexis Maurel

Rapid Prototyping Journal (2026) 32 (4): 890–902.

https://doi.org/10.1108/RPJ-07-2025-0348

Published: 19 December 2025

View article titled, 3D printing of lattice-structured hard carbon negative electrodes for sodium-ion batteries using vat photopolymerization

Add to Citation Manager for 3D printing of lattice-structured hard carbon negative electrodes for sodium-ion batteries using vat photopolymerization

Journal Articles

Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Elmira Sharabian, Mahyar Khorasani, Stefan Gulizia, Amir Hossein Ghasemi, Eric MacDonald, David Downing, Bernard Rolfe, Milan Brandt, Martin Leary

Rapid Prototyping Journal (2025) 31 (1): 127–144.

https://doi.org/10.1108/RPJ-03-2024-0141

Published: 27 September 2024

View article titled, Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Add to Citation Manager for Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Journal Articles

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process

Cesar Omar Balderrama-Armendariz, Sergio Esteban Arbelaez-Rios, Santos-Adriana Martel-Estrada, Aide Aracely Maldonado-Macias, Eric MacDonald, Julian I. Aguilar-Duque

Rapid Prototyping Journal (2024) 30 (5): 970–986.

https://doi.org/10.1108/RPJ-05-2023-0177

Published: 03 May 2024

View article titled, Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process

Add to Citation Manager for Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process

Journal Articles

Laser powder bed fusion (LPBF) of NiTi alloy using elemental powders: the influence of remelting on printability and microstructure

Agnieszka Chmielewska, Bartlomiej Adam Wysocki, Elżbieta Gadalińska, Eric MacDonald, Bogusława Adamczyk-Cieślak, David Dean, Wojciech Świeszkowski

Rapid Prototyping Journal (2022) 28 (10): 1845–1868.

https://doi.org/10.1108/RPJ-08-2021-0216

Published: 06 September 2022

View article titled, Laser powder bed fusion (LPBF) of NiTi alloy using elemental powders: the influence of remelting on printability and microstructure

Add to Citation Manager for Laser powder bed fusion (LPBF) of NiTi alloy using elemental powders: the influence of remelting on printability and microstructure

Journal Articles

Expanding the applicability of FDM-type technologies through materials development

David Roberson, Corey M Shemelya, Eric MacDonald, Ryan Wicker

Rapid Prototyping Journal (2015) 21 (2): 137–143.

https://doi.org/10.1108/RPJ-12-2014-0165

Published: 16 March 2015

View article titled, Expanding the applicability of FDM-type technologies through materials development

Add to Citation Manager for Expanding the applicability of FDM-type technologies through materials development

Journal Articles

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Amit Joe Lopes, Eric MacDonald, Ryan B. Wicker

Rapid Prototyping Journal (2012) 18 (2): 129–143.

https://doi.org/10.1108/13552541211212113

Published: 02 March 2012

View article titled, Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Add to Citation Manager for Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Update search

NARROW

Format

Journal

Type

Date

Availability

3D printing of lattice-structured hard carbon negative electrodes for sodium-ion batteries using vat photopolymerization

Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Recovery of residual polyamide (PA12) from polymer powder bed fusion additive manufacturing process through a binder jetting process

Laser powder bed fusion (LPBF) of NiTi alloy using elemental powders: the influence of remelting on printability and microstructure

Expanding the applicability of FDM-type technologies through materials development

Integrating stereolithography and direct print technologies for 3D structural electronics fabrication

Email alerts