Page 1 | Search Results | Rapid Prototyping Journal

1-10 of 10

Sort by

Journal Articles

A comprehensive investigation on microstructure and mechanical properties optimisation of 316L stainless steel produced by laser-based powder bed fusion

Ehsan Farabi, Mahyar Khorasani, Ahmad Mirzaei, Amir Hossein Ghasemi, Guy Littlefair, Eric MacDonald, Martin Leary, Ian Gibson, Stuart Bateman, Bernard Rolfe

Rapid Prototyping Journal (2026) 32 (11): 146–162.

https://doi.org/10.1108/RPJ-12-2024-0519

Published: 22 July 2026

View article titled, A comprehensive investigation on microstructure and mechanical properties optimisation of 316L stainless steel produced by laser-based powder bed fusion

Add to Citation Manager for A comprehensive investigation on microstructure and mechanical properties optimisation of 316L stainless steel produced by laser-based powder bed fusion

Includes: Supplementary data

Journal Articles

Geometric strut optimisation of as-manufactured AlSi10Mg lattice structures for enhanced energy absorption

Jason Dash, Shanqing Xu, Jordan Noronha, Mahyar Khorasani, Dong Ruan, Guoxing Lu, Milan Brandt, Chaitali Dekiwadia, David Downing, Martin Leary

Rapid Prototyping Journal (2025) 31 (11): 431–446.

https://doi.org/10.1108/RPJ-07-2024-0291

Published: 21 November 2025

View article titled, Geometric strut optimisation of as-manufactured AlSi10Mg lattice structures for enhanced energy absorption

Add to Citation Manager for Geometric strut optimisation of as-manufactured AlSi10Mg lattice structures for enhanced energy absorption

Journal Articles

Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Elmira Sharabian, Mahyar Khorasani, Stefan Gulizia, Amir Hossein Ghasemi, Eric MacDonald, David Downing, Bernard Rolfe, Milan Brandt, Martin Leary

Rapid Prototyping Journal (2025) 31 (1): 127–144.

https://doi.org/10.1108/RPJ-03-2024-0141

Published: 27 September 2024

View article titled, Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Add to Citation Manager for Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Journal Articles

Algorithmic detection and categorization of partially attached particles in AM structures: a non-destructive method for the certification of lattice implants

Matthew Philip Masterton, David Malcolm Downing, Bill Lozanovski, Rance Brennan B. Tino, Milan Brandt, Kate Fox, Martin Leary

Rapid Prototyping Journal (2023) 29 (7): 1350–1366.

https://doi.org/10.1108/RPJ-07-2022-0225

Published: 12 June 2023

View article titled, Algorithmic detection and categorization of partially attached particles in AM structures: a non-destructive method for the certification of lattice implants

Add to Citation Manager for Algorithmic detection and categorization of partially attached particles in AM structures: a non-destructive method for the certification of lattice implants

Journal Articles

A review of Industry 4.0 and additive manufacturing synergy

Mahyar Khorasani, Jennifer Loy, Amir Hossein Ghasemi, Elmira Sharabian, Martin Leary, Hamed Mirafzal, Peter Cochrane, Bernard Rolfe, Ian Gibson

Rapid Prototyping Journal (2022) 28 (8): 1462–1475.

https://doi.org/10.1108/RPJ-08-2021-0194

Published: 19 April 2022

View article titled, A review of Industry 4.0 and additive manufacturing synergy

Add to Citation Manager for A review of Industry 4.0 and additive manufacturing synergy

Journal Articles

Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Chrysoula Pandelidi, Tobias Maconachie, Stuart Bateman, Ingomar Kelbassa, Sebastian Piegert, Martin Leary, Milan Brandt

Rapid Prototyping Journal (2021) 27 (2): 429–451.

https://doi.org/10.1108/RPJ-10-2019-0274

Published: 01 February 2021

View article titled, Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Add to Citation Manager for Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Journal Articles

Heat transfer in lattice structures during metal additive manufacturing: numerical exploration of temperature field evolution

David Downing, Martin Leary, Matthew McMillan, Ahmad Alghamdi, Milan Brandt

Rapid Prototyping Journal (2020) 26 (5): 911–928.

https://doi.org/10.1108/RPJ-11-2018-0288

Published: 28 January 2020

View article titled, Heat transfer in lattice structures during metal additive manufacturing: numerical exploration of temperature field evolution

Add to Citation Manager for Heat transfer in lattice structures during metal additive manufacturing: numerical exploration of temperature field evolution

Journal Articles

Programmatic generation of computationally efficient lattice structures for additive manufacture

Matthew Leslie McMillan, Marten Jurg, Martin Leary, Milan Brandt

Rapid Prototyping Journal (2017) 23 (3): 486–494.

https://doi.org/10.1108/RPJ-01-2016-0014

Published: 18 April 2017

View article titled, Programmatic generation of computationally efficient lattice structures for additive manufacture

Add to Citation Manager for Programmatic generation of computationally efficient lattice structures for additive manufacture

Journal Articles

SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Maciej Mazur, Martin Leary, Matthew McMillan, Joe Elambasseril, Milan Brandt

Rapid Prototyping Journal (2016) 22 (3): 504–518.

https://doi.org/10.1108/RPJ-06-2014-0075

Published: 18 April 2016

View article titled, SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Add to Citation Manager for SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Journal Articles

Additive manufacture of anti-biofouling inserts for marine applications

Martin Leary, Richard Piola, Jeff Shimeta, Steven Toppi, Scott Mayson, Matthew McMillan, Milan Brandt

Rapid Prototyping Journal (2016) 22 (2): 416–434.

https://doi.org/10.1108/RPJ-02-2014-0022

Published: 21 March 2016

View article titled, Additive manufacture of anti-biofouling inserts for marine applications

Add to Citation Manager for Additive manufacture of anti-biofouling inserts for marine applications

Update search

NARROW

Format

Journal

Type

Date

Availability

A comprehensive investigation on microstructure and mechanical properties optimisation of 316L stainless steel produced by laser-based powder bed fusion

Geometric strut optimisation of as-manufactured AlSi10Mg lattice structures for enhanced energy absorption

Numerical simulation and analytical modelling of temperature and morphology of melt pool in electron beam powder bed fusion of copper

Algorithmic detection and categorization of partially attached particles in AM structures: a non-destructive method for the certification of lattice implants

A review of Industry 4.0 and additive manufacturing synergy

Parametric study on tensile and flexural properties of ULTEM 1010 specimens fabricated via FDM

Heat transfer in lattice structures during metal additive manufacturing: numerical exploration of temperature field evolution

Programmatic generation of computationally efficient lattice structures for additive manufacture

SLM additive manufacture of H13 tool steel with conformal cooling and structural lattices

Additive manufacture of anti-biofouling inserts for marine applications

Email alerts

Update search

Email alerts

Sharing Unavailable