... as a means of holding cutting tools and moving them relatively to the workpiece. In this paper, we present the results of finite element analysis (FEA) performed to investigate nature of stress and their distribution at optimum point along the two turning tables of a micro-controller based versatile machine...

... analysis techniques to predict the temperature distribution on the full and ventilated brake disc and to identify the critical temperature of the rotor. The analysis also gives us, the heat flux distribution for the two discs. Brake disk Heat flux Heat-transfer coefficient Thermal analysis Stress...

... Stress Abdo J., 2005. Experimental Technique to Study Tangential to Normal Contact Load Ratio. Tribol. Trans.  48 , 389-403. Experimental Technique to Study Tangential to Normal Contact Load Ratio Tribol. Trans 48 389 403 Abu Bakar A. R., Ouyang H., 2008. Wear prediction...

... experiments performed in accordance with the ASTM D-3039. Fatigue experiments performed in accordance with the ASTM D-3479 standard. Fatigue test was done at R =0,05 stress ratio and 0,75 frequency. World Journal of Engineering 11(1) (2014) 17-22 World Journal of Engineering Investigation of the mechanical...

... and Stress. It was found that the visual results obtained from psychophysical method of adjustment show that CIE94 as well as DIN99d still perform well for small color differences. Color difference formulae Method of Adjustment PF/3 STRESS CIE, 1995. Industrial Colour Difference Evaluation...

... plane strain theory of axisymmetric multilayer cylinders and the mechanism of the ring-like strands action. Then the design method of prestress is put forward according to the crack control. The stress is analyzed with finite-element analysis in the condition of different hydraulic pressures, and also...