.... The secondary side uses synchronous rectification to enhance conversion efficiency and reduce conduction losses. A 500 W prototype was developed for experimental validation. Thermal analysis was conducted using a thermal image camera to assess the thermal distribution and heat dissipation under different load...

... type of winding. Ali Hashemi can be contacted at: ahashemi@tvu.ac.ir 29 09 2023 28 11 2023 27 01 2024 © Emerald Publishing Limited 2024 Emerald Publishing Limited Licensed re-use rights only Thermal analysis Winding scheme Thermal equivalent circuit Packing...

... cast iron. The purpose of this study is to examine the effect of different inoculant addition on the solidification of ductile cast iron melt through thermal analysis. Design/methodology/approach Thermal analysis has recently grown as a tool for modeling the solidification behavior of ductile cast...

.... three-dimensional (3D) magnetic loss analysis is performed and extended to 3D thermal analysis to predict temperature distribution on various parts of the machine whereas Stress analysis predicts mechanical stress acting upon edges and faces of the rotor. Findings Analysis reveals that temperature...

... distribution for the two discs. Key words: Brake disk, Heat flux, Heat-transfer coefficient, Thermal analysis, Stress 1. Introduction Braking system is one of the important safety components of a vehicle. Braking system is mainly used to decelerate vehicles from an initial speed to a given speed. Friction...

... distribution on the full and ventilated brake disc and to identify the critical temperature of the rotor. The analysis also gives us, the heat flux distribution for the two discs. Key words: Brake disk, Heat flux, Heat-transfer coefficient, Thermal analysis, Stress 1. Introduction Braking system is one...

... Electric Machines and Drives Conference (IEMDC) 911 916 Cezario, C. A., Verardi, M., Borges, S. S., da Silva, J. C., Oliveira, A. A. M., 2005. Transient thermal analysis of an induction electric motor, Proceedings the International Congress of Mechanical Engineering (COBEM). Transient...