The coronavirus disease (COVID-19) pandemic generated a worldwide financial crisis by impacting several links of the supply chain, however companies can take advantage by quantitatively measuring the disruptive impacts.
This study sought to develop the failure mode and effect analysis and supply chain resilience (FMEA-SCR), a hybrid tool developed using a potential failure mode and effect analysis (FMEA) applied to supply chain resilience (SCR) and taking into account the capability factors and business processes.
In order to validate, the proposed model was applied into two different organizational study cases: an university and a cooperative managing urban solid wastes with recyclable potential (MSWRP). Through the procedures described here any organization can understand and assess in a simplified way the impacts over their supply chain generated by such a crisis.
This study synthesizes three different procedures into a single method called FMEA-SCR, allowing organizations to understand and assess in a simplified way, the impacts over their supply chain generated by COVID-19. To this end, it brought together the studies developed by Rajesh and Ravi (2015) and Curkovic et al. (2015), on possible causes of disruptions in SC, the capability factors of Pettit et al. (2010) used by organizations to mitigate the effects of disruptions, besides Lambert's and Croxton (2005) business processes, thus weaving a method that allows organizations to visualize, analyze and classify the pandemic impacts over their supply chain.
1. Introduction
The economy and consequently the supply chain (SC) are impacted by crises, such as the 2008 global financial crisis, which had repercussions in several countries, devastating economies, decimating financial resources and almost collapsing banking systems in several countries (Hausman and Johnston, 2014).
From 2020 to now, the world is experiencing a pandemic generated by the coronavirus disease (COVID-19), and according to Anderson et al. (2020), the governments will not be able to minimize both deaths from COVID-19 and the economic impact of viral spread. Keeping mortality as low as possible will be the highest priority for individuals; hence, governments must put in place measures to ameliorate the inevitable economic downturn.
Governments sought to develop public policies to reduce the burden of this pandemic on health systems, which is commonly referred to as flattening the curve (Requia et al., 2020). In order to minimize contagion and consequent deaths, several countries have adopted social isolation, which is accomplished by limiting, decreasing or paralyzing the flow of people. This strategy is certainly very effective in reducing mobility on a global scale in the short term, but it also generates a high negative socioeconomic impact in the short and long terms (Iacus et al., 2020).
In countries where the curve has been flattened, such as the United States, Brazil, Russia and India (WHO, 2020), there has also been a gradual reopening of the productive sector, but with several restrictive measures of social distance. Another important aspect is psychological, because even if people are free to start consuming again, they may be afraid of becoming infected.
These characteristics make the environment of demand and the future of SC is uncertain, unlike other events that generated SC demand disruptions, for example, Hurricane Katrina and the 2008 global financial crisis; however, once their effect had ceased, they tended to seek to return to normality. In this context, this recent pandemic has the characteristics of significantly altering consumption habits and changing demand patterns that are completely different from those currently digitally adopted.
It is possible to find ways in which the SC can lighten disruption impacts, one of which is resilience (Hosseini et al., 2019; Yu et al., 2019); that is, models that are applied to the SC enables the recovery of its processes and economic indicators to occur more quickly (Chowdhury and Quaddus, 2015; Suresh Kannan et al., 2016). Supply chain disruption-oriented firms require the ability to reconfigure resources or have a risk management resource infrastructure to develop resilience (Ambulkar et al., 2015).
Several models have been developed and tested with characteristics inherent to the SC disruption phenomenon. Increase in frequency and the serious consequences of past interruptions have resulted in a growing interest in the topic. Economic systems are increasingly prone to complexities and uncertainties. Therefore, making decisions based on consistent information requires risk analysis, control and mitigation (Heckmann et al., 2015).
The SC Responsiveness, Resilience and Restoration (3Rs) dynamism have a significant positive effect on having their financial impacts diminished (Queiroz et al., 2020). Another important aspect is related to the SC regionalization, an effective way to soften the negative impacts of environmental interruptions (Kamalahmadi and Parast, 2017).
Before investing in the SC risk management practices, companies need to identify their technological abilities that influence and impact these practices. Companies that are too immature in their capabilities are unable to implement risk management practices, so more advanced (context-sensitive) approaches are needed, especially in relation to the risk-taking attitude of the decision-maker and in relation to the affected SC environment (Heckmann et al., 2015).
FMEA is a method initially developed for product and process quality management, but with application and great results in various areas such as: development of risk-based improvement selection model within virtual environment; establishment of model on linking risk-based improvement strategy selection with business performance management tool such as balanced scorecard (BSC) and customer relationship management (CRM) and change management model (Sutrisno et al., 2014). Its adaptation to quantify and prioritize scratches allied to the SC disruption is evident but not found in the literature.
In view of the problematization, there is a lack of studies that correlate FMEA and SCR with the COVID-19 pandemic impacts in order to create mechanisms for the SC to respond positively and adequately (Queiroz et al., 2020). To integrate disruption and capability factors with SC processes, FMEA is used to analyze the inherent processes and risks (Liu et al., 2019), transforming qualitative aspects into quantitative ones (Curkovic et al., 2015), having obtained qualitative results in risk reduction in several areas (Liu et al., 2019; Maggiulli et al., 2020). Thus, the union of those linked to the FMEA-SCR processes will be demonstrated throughout the article.
Within this context, the research question raised was: are companies technologically capable of providing resilience to their SC? The answer is yes, as technological capabilities have enabled companies to use tools to produce insights into key SC processes (Rajesh, 2017). Thus, it can be said that resilience is a way that the SC can use to better respond to interruptions, which are identified and evaluated using performance indicators (Rajesh, 2016). So, this study proposes a combined methodology that allows organizations to quickly realize the disruptive factors and how the SC can mitigate the impacts generated by COVID-19.
To this end, we analyze: (1) the literature in search of characteristics inherent in the disruption of the SC caused by governmental actions of social isolation linked to the fight against COVID-19; (2) characteristics inherent to SCR that are best suited to soften these impacts, in order to integrate them through the FMEA method, the integrating method called FMEA-SCR, which he considers, was developed, which he considers capacity factors and SC business processes.
We use the proof of concept (Kendig, 2015) to test and validate the FMEA-SCR model presented. This study aims to provide managerial insights and guidelines for practitioners to improve the Responsiveness, Resilience and Restoration (3Rs) of their SCs.
2. Literature review
2.1 Supply chain resilience – SCR
The effects generated by SC interruptions can be used as resilience resources by members of the network (Craighead et al., 2007). Since economic systems are increasingly prone to complexity and uncertainty, making informed decisions requires risk analysis, control and attenuation.
Risk in SC can be defined as the potential loss in terms of its target values of efficiency and effectiveness evoked by uncertain developments of its characteristics whose changes were caused by the occurrence of a triggering event. The risks can be divided into: (1) probability and/or adverse outcome; (2) supply risk; (3) deviation from the expected (or still does not present any explicit definition of risk); (4) as an event; (5) a deviation from the expected or objective; or (6) a probability (Heckmann et al., 2015).
Currently, SCs need to meet efficiency-oriented objectives; approaches must take into account the balance of these opposing requirements, for example, the balance of distribution costs and shipping fees or general logistics costs and service level risk. This balance can be achieved by increasing resource investment that can be resilient, presenting a positive result in the repair of productive capacity and SC logistics (Goldbeck et al., 2020).
From another perspective, when analyzing how certain disruptions impact suppliers, it appears that their allocation and reallocation can be helped by models that prioritize critical suppliers, helping to balance SC efficiency and resilience (Hosseini et al., 2019). Thus, it can be concluded that, at least under certain conditions, there may be prioritization of critical resources and that such prioritization would have positive impacts on results.
For example, in a SC analysis related to the 2008 global financial crisis, it was found that it would be possible to develop a proactive, resilient network that could prevent future crises; this interaction was carried out by including members of the chain upstream and downstream (Wang et al., 2018). Thus, it would be possible to use some of these characteristics to mitigate the impacts caused by COVID-19 (Vahid Nooraie and Parast, 2016).
The SCR starts with the identification of the vulnerability factors that cause disruption or change over the SC, shown in Table 1.
Once the company is able to determine the risk associated with the factors that may cause change or break, it is important to describe how it can positively react in order to weaken impacts or even obtain competitive advantages.
2.2 Models and approaches for measuring capability factors in the supply chain
In a quantitative way, several models were developed trying to visualize SC impacts and how organizations can efficiently work their resources to relieve them, where some models consider suppliers as resources and others as results to be relieved. Below, some of them are presented with the intuition of supporting the construction of a joint model.
To analyze suppliers, López and Ishizaka (2019) used fuzzy cognitive maps (FCM) and analytical hierarchy process (AHP), resulting in the impact of the localization decision on the offshore outsourcing process at SCRM. The sensitivity analysis of the results reveals that a site would improve the SC resilience. This FCM-AHP analysis improved the understanding of academics and professionals about the importance of location criteria and their influence on SCRM capabilities.
In another study, a combination of learning and supervised machine simulation showed increased delivery reliability through the discovery of critical suppliers (or combinations of suppliers) whose interruption results in diminished adverse performance (Cavalcante et al., 2019).
Regionalization can also be a way to alleviate the negative impacts of SC disruptions (Kamalahmadi and Parast, 2017). Bearing in mind that the dynamism of SC has a significant positive effect on the guidance on SCR interruptions since it is affected by orientation interruptions (Yu et al., 2019).
Another possibility of working capacity in a resilient way is the separation of capacity into: (1) traditional criteria: cost, quality, lead time and quick response; (2) resilient capacity absorption criteria: excess stock, separation location, interdependence, robustness and reliability; (3) adaptation criteria: forwarding and reorganization; and (4) capacity restoration criteria: repair or restoration (Hosseini and Khaled, 2019). To analyze the SCR, Pettit et al. (2010) propose a model composed of 14 capability factors, which are subdivided into n sub-factors (Table 2).
2.3 Supply chain processes
Several models analyze the SC, among them is the SCOR model developed by the Supply Chain Council (SCC), which evaluates four macro processes: (1) Performance – Standard metrics to describe process performance and define strategic goals; (2) Processes – Standard descriptions of management processes and process relationships; (3) Practices – Management practices that produce significantly better process performance; and (4) People – Standard definitions for skills required to perform SC processes (Stewart, 2011).
Besides that, Lambert and Croxton (2005) propose a framework that describes the SC processes, taking specific factors into account, as follows (Table 3).
2.4 Failure modes and effects analysis (FMEA)
Quality tools have been used for years to quantify and prioritize quality problems in several areas, for example, in studies conducted on the manufacturing sector using the pure FMEA or mixed with quantitative decision-making methods such as AHP and/or fuzzy logic, as well as in studies that present areas such as the possibility of application as a risk of distribution in SC, waste management and service operations (Sutrisno et al., 2014).
Some studies have also been conducted on COVID-19 in medical areas to prevent contamination risk in laboratories (Maggiulli et al., 2020) and develop protocols for managing inpatients with COVID-19 (Sevastru et al., 2020).
Risk assessment within SC can be performed using FMEA; thus, it is possible to quantify and prioritize the risks in SC (Curkovic et al., 2015), and it is possible to adapt it to SCR, as shown in this work.
Based on the bibliographic survey on SCR and the importance of disruption factors, the term FMEA is sometimes replaced by disruption since the concepts presented list a wide range of causes of disruption in the SC and can be measured in terms of severity, probability of occurrence and mitigation, as shown in Tables 4–6.
3. Methodology
In this section, the development of the method is presented by the FMEA-SCR and taking into account the SC capacity factors and processes and aiming to be followed by an organization in order to carry out its position in relation to the disruption of their SC. Some scales are proposed to assess the disruption risk.
Step 1: Identify among the disruptions listed in Table 1: factors that cause disruption or changes in the SC, briefly describe the disruption and assess the severity of the disruption (for both the scale and the qualitative quantitative conversion procedures for the assessment of the severity of the disruption, the scales used in Table 4 are based on studies by Curkovic et al., 2015).
Step 2: To assess the probability of occurrence of the disruption, a FMEA of disruption occurrence degree ranking showing which parameters should be adopted for the probability of occurrence of disruption, the scales used in Table 5 are based on studies by Curkovic et al. (2015).
Step 3: Evaluate the possibility of assuaging the disruption. In this study, two different ways were pointed out: the SC capability factors and business processes. These are described in Tables 2 and 3, so one should identify the capability factor, analyze its definition, describe the subprocesses, demonstrate the mitigation potential and describe the procedure that will be performed. In relation to the SC process, it is necessary to describe how your intervention will be and what its mitigation potential will be afterward.
To check the quantification of the data, for both, scales to soften the risk of constant disruption were called FMEA – risk mitigation degree ranking (Table 6), with the same scale being applied for both factors. To maintain the detection calculation, the result was divided by two. The Level of Prevention Disruption of Supply Chain (LPDSC) is calculated as follows (Equation (1)).
Table 6 shows the FMEA risk mitigation degree ranking:
3.1 FMEA-SCR application
Taking into account the information described in Tables 1–6, in this work, the combined model was applied to an educational institution and a cooperative for the collection of recyclable materials.
The first organization analyzed is a higher education organization with more than 100 years of history, founded in 1909. In 2020, the university will have 13 campuses, 32,000 students, 2,500 teachers and 1,200 administrative technicians. Its performance in teaching is linked to technical, technological, undergraduate and graduate courses.
The second organization analyzed is a cooperative, which has two basic types of recyclable material input. The material comes from companies called large generators because the volume of recyclable material generated is high. Another source of recyclable material comes from homes, where the cooperative conducts selective collection door-to-door. The cooperative has a contract with the municipal government under which it receives a fee for each residence served. The sale of the collected material is made to companies in neighboring cities or neighboring states, and the city gives in to the cooperative (Fidelis and Colmeneiro, 2018; Fidelis et al., 2020).
4. Results and discussion
For the purpose of validating the proposed combined model, two organizational cases will be presented, showing the complete analysis of the FMEA-SCR.
Regarding the first organization analyzed in March 2020, the institution entered a lockdown, ending all of its teaching, administrative and research and extension activities in person. Administrative work was carried out remotely and with restrictions on the movement of people in research laboratories. Undergraduate classes were maintained remotely for two weeks and were interrupted after this period. The academic calendar was paralyzed after this period, but with the extension of actions linked to isolation, the university created a new regulation for the development of undergraduate and graduate classes and in August, teaching activities were carried out in a non-presence manner.
The analysis of this process was performed through the proposed tool FMEA-SCR, where the disruptions are described as well as the internal and external factors of the organization that can be used to mitigate them. The FMEA-SCR analysis intends to demonstrate how the institution can work within the internal factors of the organization and factors linked to the supply chain to mitigate the impacts of the pandemic.
Table 7 presents the FMEA – SCR application applied to the case study at the university.
In the study case related to the university, it can be seen that the first impacts generated by COVID-19 are linked to disruption factor turbulence since there was an interruption in classroom teaching activities from March 2020 to February 2022.
The choice is related to the fact that the university is part of a supply chain, not in the classic model of SC (product manufacturing), but as a teaching service provider in the following sense of SC links: book suppliers, equipment (computers, video resources, software), laboratory maintenance equipment, consumer materials (reagents, office supplies) and at the focal company: students, teachers, and academic community; and downstream companies that receive professionals trained by this university that can directly affect the performance of a country's economy, research results (published scientific articles), including vaccine development.
Given this and the strong impact caused by the disruption of activities in this chain, since in Brazil, some universities only returned to their face-to-face activities in 2022, this chain was chosen for analysis as it was highly impacted by the disruption caused by COVID-19.
This caused a major break in the university's teaching, research and extension activities. The main consequence of the interruption is the possible dropout of students, which is described in Table 7 in its second line. To mitigate this impact, the institution approved a new regulation for non-face-to-face distance classes, using the capability factor adaptability and along the supply chain, worked with the process of SC (CRM), making use of its network contacts with students (email, lives on YouTube, mobile apps) to explain the procedures that would be performed to maintain teaching activities.
Teaching activities (online classes) were maintained, reducing student evasion. The remote mode of teaching (live classes and/or recorded by professors) was carried out, and as a consequence, the university was able to maintain its academic calendar even during the periods (2020–2021) in which the university was closed.
Continuing the disruption analysis, it was possible to verify that despite their potential impact, since it presents a high risk and a high probability of causing problems, the actions that can be taken by the organization are aimed at mitigation through the adaptability factor, where the organization can create a new regulation, using its relationship network with its students to assist in the approval of the regulation, as well as build a new form of teaching called synchronous teaching, which in turn is responsible for mitigating some impacts that refer to the departure of students and the cancellation of a new entry of students in two semesters.
The highest FMEA-SCR factors are linked to the limited resources, tending to decrease the number of students and consequently decreasing the resources to be invested in research and extension projects.
The organization used its capability factor with the synchronous procedure and also used the SC process of customer relationship management to mitigate students' departure impacts. However, it does not have a significant impact, given the tendency of the organization to lose students. As an example, consider the case of new classes of MBA courses that have not been launched, as in most cases there was no time to prospect internally for synchronous activities.
This same disruption generates losses in relation to the maintenance and prospection of new research and extension projects with the university. Thus, there was a significant damage to research activities since many researchers were paralyzed as they depended on manpower to carry out tests and analyses.
The fact that research activity is directly linked to teaching activity is one of the factors causing such an impact since the students who are linked to scientific initiation, master's and doctoral activities, for the most part, live in cities other than the university headquarters, so they returned to their hometowns, maintaining academic activities but interrupting activities related to search.
The capability factor used to mitigate this impact, adaptability through the search for a database and changes in research and extension projects to meet the demands of development agencies on COVID-19, proved to be limited since the university had research lines linked to engineering and the demand was for studies related to the health area. The SC process used to mitigate the impact, supplier relationship management, which aims to seek from partners the maintenance of resources, also proved to be limited.
Thus, the organization was able to mitigate some impacts with its internal and external factors, but the disruption factor's turbulence tends to pose a greater risk since it was not found within its capability factor or SC process, resulting in actions capable of completely mitigating the risks caused by the disruption.
Risk factors were classified according to severity and probability. The aspects of impact mitigation for the SC disruption take into account several capacity factors and processes that, if an organization has developed them, can serve as a basis to mitigate the impacts generated by the pandemic, thereby enhancing the 3 R's of SC.
The first analysis was carried out in a targeted manner and predicts that a large-oriented brainstorm will be carried out, where each disruption factor is presented: turbulence; deliberate threats; external pressures; resource limits; sensitivity; connectivity; vendor or customer interruptions.
An analysis of all the disruptive factors allows the company to think about how COVID-19 can impact its several SC links from the perspective of quantitatively measuring them, and this procedure takes place in the second phase. In a high-impact disruption context, resource reconfiguration fully mediates the relationship between SC disruption orientation and firm 3Rs.
In a low-impact disruption context, SC disruption orientation and risk management infrastructure have a synergistic effect on developing firm resilience (Ambulkar et al., 2015).
Table 8 presents the FMEA-SCR results applied to the recyclable materials company, considering capability factors and SC processes.
The second case analyzed is linked to the reverse supply chain of recyclable materials.
The link chosen to be analyzed is responsible for the collection and separation of urban solids with recyclable potential, and the company is the focal company of the study, a cooperative that follows recyclable materials, performing the residential urban collection of recyclable materials and large generators (companies that generate recyclable materials). It separates these materials into more than 40 different types of categories, presses and markets. The main services provided are the collection, the protection of the environment and the improvement of working conditions through the income generation and improvement in the working conditions of the members. To this end, it sells its services to public and private organizations, and its products are marketed to industries belonging to the reverse and traditional supply chains.
Thus, the cooperative for recyclable materials and its main impactful links of the supply chain are: downstream industries that have as their raw material recyclable materials; upstream populations; large generators that recently used the collection service; city hall (the service contractor); and the environment, since if the service is not performed, the destination of waste will be the landfill.
Regarding the application of the FMEA-SCR to this second case study, initially the analysis is performed in an oriented manner and provides that a large oriented brainstorm is performed, where each disruptive factor is presented, namely: turbulence; deliberate threats; external pressures; resource limits; sensitivity; connectivity; and supplier/customer disruptions.
The turbulence factor was the first identified; of course, COVID-19 causes the disruption in SC, but when analyzing the other breaking factors, it appears that there were disruptions in relation to suppliers and consumers of the cooperative; in short, all factors allowed disruptions to be analyzed, described and quantified as to their impact and probability of occurrence.
Analysis of all factors related to possible disruptions in the SC allows the company to think of how COVID-19's pandemic can impact the SC links, and from the same perspective, one can quantitatively measure their impact.
Once the disruption factor is identified, the company can view how the various capability factors can be used to mitigate impacts. This procedure happens in the second phase.
So an analysis of the capability factors can be performed, taking into account each set of capabilities: flexibility in supply; flexibility in order to fulfill; capacity; efficiency; visibility; adaptability; anti-culture; recovery; dispersal; collaboration; organization; market position; financial security and soundness. Its analysis allows an organization to understand, quantify and minimize its effects. Thus, the company can visualize how they can be used as internal resources (dimensions).
Another capability that can be cited (but it does not suit this case study) is information technology (IT), since organizations increasingly rely on it to improve the supply chain process. However, evidence suggests that investment in IT per se does not guarantee enhanced organizational performance. This capability can serve as a catalyst for transforming IT-related resources into higher value for a firm (Wu et al., 2006).
The analysis was carried out also taking into account the following SC processes: customer relationship management, customer service management, demand management, fulfillment of orders, manufacturing flow management, supplier relationship management, product development and commercialization and returns management. It was through this association analysis that the organization visualized and identified actions related to the SC processes that could be used to alleviate the impacts of disruptions, this procedure was also quantified.
In summary, the main points analyzed were: the disruption factor, of which the most impacted the recycling chain, were turbulence (LPDSC score 79), sensitivity (LPDSC score 79) and rearness (LPSSc score 40.5).
The disruption had a high degree of impact on almost all the factors analyzed, but some impacts were mitigated, such as the external factor. Pressures, which were mitigated by the SC process, generated an increase in demand from large generators due to the increased materials generated. By great generators, it also draws attention to the disrupton sensitivity factor: the risk of contamination, since there has been an increase in the number of masks used by people to prevent COVID-19 contamination.
The union between a supply chain factor and a process has a multiplier weight, since the combination of these two elements can drive a reaction of the company within the SC in order to mitigate the disruption factors.
When major disruptions occur, many supply chains tend to break down and take a long time to recover. However, not only can some supply chains continue to function smoothly but also they continue to satisfy their customers before and after a major disruption. A robust strategy will enable a firm to manage regular fluctuations efficiently under normal circumstances, regardless of the occurrence of major disruptions (Tang, 2007).
So, a robust strategy will help a firm sustain its operations during a major disruption. Through the data analysis presented (Tables 7 and 8), it is possible to clearly understand which disruptions are impacting the SC. Through the procedure described here, the organization can verify which factors can be used to soften the disruption's impacts.
The result regarding the LPDSC is at the discretion of the organization and classifies the elements of disruptions; capability factors and processes together, clearly exposing which would have the greatest impact and also the lowest risk.
A FMEA-SCR hybrid tool was present by taking into account business processes and risk mitigation factors, so they are unified, described and quantified, summarizing the information collected in a single table that allows activities to be prioritized by the companies. Thus, the company can identify the disruptions with the greatest impact on their supply chain and seek actions to minimize or avoid the impacts of such a pandemic crisis.
5. Conclusions
This study synthesizes three different procedures into a single method called the FMEA-SCR, allowing organizations to understand and assess in a simplified way the impacts on their SC generated by COVID-19. To this end, it brought together the studies developed by Rajesh and Ravi (2015) and Curkovic et al. (2015) on possible causes of disruptions in SC, the capability factors of Pettit et al. (2010) used by organizations to mitigate the effects of disruptions and Lambert's and Croxton's (2005) business processes, thus weaving a method that allows organizations to visualize, analyze and classify the pandemic impacts over their supply chain.
To validate the combined model, it was applied to two different organizational proofs of concept, allowing the description, analysis and quantification in a wide and detailed way of the impacts caused by COVID-19, as well as the classification according to criteria of criticality. The simplicity of the method allows even organizations without a large organizational structure to use it and achieve favorable results to alleviate disruption impacts.
For future work, other forms of decision-making analysis can be studied, such as the analytic hierarchy process (AHP), analytic network process (ANP), fuzzy logic DEMATEL and disruption analysis network (DA_NET) methods, which have already proven useful in combination with the FMEA and SCR in other scenarios.
